Wasp Barcode WLS8600 Product Reference Guide - Manual (Page 50)

Enter Configuration Exit and Save Configuration
М$+;О
DATA FORMAT
М$-?О
FIELD ADJUSTMENT
 disable field adjustment
МEF0[О
Field adjustment allows a number of characters n, to be added to or subtracted from the
barcode read. The adjustment can be different for each enabled code type. To define the field
adjustment:
 Read the enable field adjustment code:
enable field adjustment
МEF+О
 Select the code type from the Code Identifier Table in Appendix B .
 Select the type of adjustment to perform:
right addition
М01О
left addition
right deletion
М12О
М23О
left deletion
М34О
 Read a number in the range 01 - 32 from the Hex/Numeric Table to define how many
characters to add or delete:
Conditions:
• Adjustment is only performed on the barcode data, the Code Identifier and Code Length
Transmission fields are not modified by the field adjustment parameter.
• If the field setting would subtract more characters than exist in the barcode, the subtraction
will take place only to code length 0.
• You can set up to a maximum of 10 different field adjustments on the same barcode family
or on different barcode families.
Example: To add 4 characters to the right of Standard Code 39 Codes:
enable field adjustment Code 39 right addition
Read
МEF+О
+
ÌVWÎ
+
М01О
+ 04
44