Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 103)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 103 of 108
! " % - .%/%0
To check the status of inputs on a WI-I/O 9-L-T:
1. Navigate to the Unit page for the unit you want to check.
2. Click
Read Inputs .
3. WI Series shows a page indicating the status of all inputs to the module:
4. Click Update to read the status of the inputs from the module.
5. For analog values (i.e.. 4-20 mA analog, Thermocouple, Temperature and Battery
Voltage), you can select the units for displaying the data:
Raw – shows the value as a decimal number;
Hex – shows the value as a hexadecimal number, both in the internal representation of
the module;
mA – displays the number of milliamps that would be output if the data was sent to an
Analog output on an Weidmuller, Inc. I/O module; and
% – displays the percentage of the nominal full scale range.
For more information on translating between different analog signal types, Appendix A
– Tables for translating different analog signal types on page 104.