Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 60)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 60 of 108
&
Deleting units lets you remove a unit from the system.
To delete a unit:
1. Open the project.
2. Select the unit you want to delete
3. Right click and from the shortcut menu select
Delete Unit . You can also click Delete
Unit in the Unit Options panel of the unit screen:
Note
If you do not select a unit to delete, WI Series shows the following message:
Click OK to acknowledge the message and select the unit you want to delete.