Weidmuller WI-I/O 9-L: Wireless I/O Transmitter / Receiver v1.3 - Manual (Page 57)

WI-I/O 9-L Configuration Manual
WI-I/O 9-L Wireless I/O page 57 of 108
"
The WI-I/O 9-L-T supports a secondary address that lets you re-use the same unit address
for multiple transmit-only units. This is useful if your network has a large number of transmit-
only units.
To re-use the same address:
Note
To use the same address you must have an existing WI-I/O 9-L-T unit.
1. Create a new WI-I/O 9-L-T.
2. WI Series checks if you want to manually set the address:
3. Click Yes to manually set the address. If you click No WI Series will select an unused
address for the new unit, or if you click Cancel the new module will not be created.
4. Select an address already used by a transmit-only unit that you want to reuse and click
OK to set the address. If you click Cancel WI Series will return to the previous
screen without creating a new unit:
5. WI Series automatically assigns the secondary unit address to a different number:
6. Click OK to acknowledge the message.
7. You have created a unit with a new secondary address.