Rockwell Automation 1203-SSS Smart Self-powered Serial Converter User Manual
Page 22
Advertising
3-6
Configuring the Serial Converter
8. Select the settings shown in
.
Important: If you have previously set Parameter 03 - [DF1 Rate
Cfg] to 19.2K or 38.4K, select that value in the Bits per
second box.
Figure 3.4 Properties Dialog Box
9. Click OK. A blank HyperTerminal workspace appears.
10. Select File > Properties to display the Properties dialog box.
11. Click the Settings tab. See
.
12. Under Function, arrow, and ctrl keys act as, select Terminal keys.
13. In the Emulation box, select VT100.
Advertising