Rockwell Automation 1203-SSS Smart Self-powered Serial Converter User Manual
Page 23
Configuring the Serial Converter
3-7
Figure 3.5 Properties Dialog Box
14. Click OK to display the HyperTerminal workspace.
15. Press the Enter key until the main menu appears.
Figure 3.6 Main Menu
If no text or meaningless text appears instead of the Main Menu, adjust
the baud rate in your software. Refer to
for detailed instructions.
TIP: Select File > Save to save the HyperTerminal configuration that
you just created. In future connections, you can select the saved
configuration and quickly connect to the serial converter.
What do you want to do?
Page
Edit the serial port rate, or fault action
through
View the event queue
View DF1 data
Update the firmware
Main Menu - Enter Number for Selection
1> Display Setup Parameters
2> Display Event Queue
3> Flash Upgrade