Rockwell Automation 160PD1 160 Profibus Communication Module - Manual (Page 32)

6–6 Using the 160-PD1 on Profibus
Click OK and the GSD file previously loaded, creates a fixed format
I/O structure of 8 bytes in and 8 bytes out. Click on the Modules tab
to view.
Now the 160-PD1 address starting point needs to be specified.
Click on the SLC Address tab.
In our SLC example code, the 160-PD1 has been mapped at:
Inputs I:2.14
Outputs O:2.14
This is 14 words offset from the start address of the card.
Select the ”Out8bytes” from the available options, and specify an
offset of 14.