Rockwell Automation 1500 DeviceNet MV Controllers Installation Instructions - Manual (Page 32)

8-4 Filling a Prepared Space in a Medium Voltage Controller Line-up with DeviceNet
1500-IN057C-EN-P – June 2013
Software Update
After installing a controller kit in an IntelliCENTER MV line-up, the
user must update the IntelliCENTER software by following these
directions.
This is done by merging the data disks for the controller kit(s) with the
existing IntelliCENTER database. Please refer to the IntelliCenter
software manual 2100-UM002_-EN-P.
IntelliCENTER software is a PC-based application used to monitor and
troubleshoot Centerline low and medium voltage controllers. It consists
of two software CDs:

Application CD
 Data CD
The Application CD is the same for both low and medium voltage
controllers. The Data CD is unique, and it is provided for each low or
medium voltage line-up. A Data CD can also be provided for each
addition to a line-up or a medium voltage controller kit.
If any of the following hardware changes are made to your medium
voltage line-up, you must update the IntelliCENTER software installed
on your PC:

Installation of a new line-up, that you wish to access within an
existing IntelliCENTER software workspace
 Addition of new structures, to an existing line-up
 Addition of a controller kit to a prepared space
 Re-location of a structure (i.e. moving from left side to right side of
line-up)
Please refer to Rockwell Automation publication 2100-UM002_-EN-P
for instructions on how to update the IntelliCENTER software, using the
new/updated Data CDs.
IntelliCENTER
Software Update