Rockwell Automation 1500 DeviceNet MV Controllers Installation Instructions - Manual (Page 5)

Chapter
1
1500-IN057C-EN-P – June 2013
DeviceNet Medium Voltage
Controller Overview
This document describes the cable system construction and
components associated with a DeviceNet™ network that is
factory installed in Bulletin 1500/1900 CENTERLINE® and
IntelliCENTER® Medium Voltage (MV) controllers. Refer to
other documentation provided with the MV controller for general
information on the installation, use and maintenance of this
equipment.
A T T E N T I O N A T T E N T I O N
Before performing any service or maintenance
activities on MV controller sections, disconnect
all power sources. Use suitable personal
protective equipment (PPE) per local codes or
regulations. Failure to do so may result in
serious injury or death.
The information included in this document is specific to medium voltage
controllers. For general information related to DeviceNet, refer to the
following publications:
DeviceNet Selection Guide DNET-SG001_-EN-P

DeviceNet Media, Design and Installation Guide DNET-UM072_-EN-P

 The underlined alpha character in these catalog numbers designates the latest revision at the
time of this printing. The character will increase alphabetically with successive revisions.
Always order and use the latest revision available.