Rockwell Automation 1413-CAP-ME-PE Capacitor Bank Controller, Series C - Manual (Page 18)

18 Rockwell Automation Publication 1413-UM001D-EN-P - November 2010
Chapter 2 Installation
Install the PanelView
Component C600 Touch
Terminal Before installing the terminal in a panel, review minimum clearances, panel
guidelines, panel cutout dimensions, and product dimensions.
Figure 3 - PanelView Component C600 Terminal
Parts List
PanelView Component terminals ship with these items:
• Power terminal block
• RS-422/RS-485 5-pin terminal block
• Panel cutout template
• Accessory CD
• A pair of mounting levers (for PanelView Component C600 terminals —
2711C-T6M, 2711C-T6C Series C or later, 2711C-T6T Series A or later)
IMPORTANT The capacitor bank controller is compatible with the PanelView
Component C600 terminal firmware revision 1.3 or later.
Item Description Item Description
1 Touch display 7 USB device port
2 24V DC power input 8 Diagnostic status indicator
3 10/100 MBit Ethernet port 9 Replaceable real-time clock battery
4 RS-422 or RS-485 port 10 USB host port
5 Mounting slots
(for 2711C-T6M, -T6C Series C or
later, 2711C-T6T Series A or later
only) 11 Secure digital (SD) card slot
6 RS-232 serial port
2 3 4 6 7
8
1
11
10
9
FAULT
B
6 1
T T- R R- S
5
PanelView C600
(C600 Series C terminal shown)