Rockwell Automation 1413-CAP-ME-PE Capacitor Bank Controller, Series C - Manual (Page 69)

Rockwell Automation Publication 1413-UM001D-EN-P - November 2010 69
Glossary
The following terms and abbreviations are used throughout this manual.
For definitions of terms not listed here, refer to the Allen-Bradley Industrial
Automation Glossary, publication
AG-7.1 .
Bank An overall capacitor or tuned-filter assembly. This controller is designed to
manage and control one bank consisting of 10 steps.
Instance An instance of an object represents a complete iteration of an object and all of its
attributes and methods. For example, the vacuum switch describes a typical
vacuum switch. Each physical switch would result in one instance of a vacuum
switch object. Each instance of an object must be managed independently in the
software.
PM See PowerMonitor meter.
PowerMonitor meter The power measuring device located at the plant mains. There may be more than
one PowerMonitor meter in a system depending on the number of electrical feeds
into the plant.
Step A single switched circuit in a capacitor or filter bank. There are up to 10 steps in a
bank. Others in the industry may also refer to these as stages.