E - technical specifications, Product approvals, Compliance to european union directives – Rockwell Automation 1403-NSC Smart Communication Card Instruction Sheet User Manual

Page 81: Technical specifications, Appendix

Advertising
background image

Appendix

E

Publication 1403-5.1

Technical Specifications

Product Approvals

UL 508 Component Recognized File E96956 and
CSA C22.2 approval for Industrial Control Equipment.

Compliance to European Union Directives

If this product has the CE mark it is approved for
installation within the European Union and EEA regions.
It has been designed and tested to meet the following
directives.

EMC Directive

This product is tested to meet Council Directive
89/336/EEC Electromagnetic Compatibility (EMC) and
the following standards, in whole or in part, documented
in a technical construction file:

EN 50081-2 – Generic Emission Standard, Part 2 –
Industrial Environment

EN 50082-2 – Generic Immunity Standard, Part 2 –
Industrial Environment

This product is intended for use in an industrial
environment.

Low Voltage Directive

This product is tested to meet Council Directive
73/23/EEC Low Voltage, by applying the safety
requirements of IEC 1010-1.

This equipment is classified as open equipment and must
be installed (mounted) in an enclosure during operation
as a means of providing safety protection.

Screw Torque and Wire Size

Position

Ratings

Mounting Screw Tightening
Torque

0.9 to 1.1 Nm (8 to 10 lb-in.)

Communications Connector

0.6 to 0.8 Nm (8 to 10 lb-in.)

Terminal Screw Tightening
Torque

0.2 to 2.5 mm

2

(24-12 AWG),

stranded or solid wire, Cu wire
only.

Terminal Block/Wire Insulation
Temperature Index

75

°

C maximum

Environmental Specifications

Operating Temperature

–40

°

C to +60

°

C

Storage Temperature

–40

°

C to +85

°

C

Humidity

5 to 95 percent,
non-condensing

Vibration

Operational: 0.006 in. DA/1.0 G
Sine, 10 to 500 Hz, 3
orthogonal axes.

Vibration

Non-operational: 0.015 in.
DA/2.5 G Sine, 10 to 500 Hz, 3
orthogonal axes.

Shock

Operational: 15 G, Half Sine,
11 ms duration, 3 orthogonal
axes, 3 (+) and 3 (–)
pulses/axes, 18 pulses total.

Shock

Non-operational: 30 G, Half
Sine, 11 ms duration, 3
orthogonal axes, 3 (+) and 3 (–)
pulses/axes, 18 pulses total.

Advertising