Bypass terminations – Rockwell Automation 1608P ProDySC User Manual, 100/110 A User Manual
Page 14
Advertising
14
Rockwell Automation Publication 1608P-UM002A-EN-P - July 2013
Chapter 2
Installation
Bypass Terminations
The recommended bypass switch input and output terminals are located inside
the bypass enclosure. All terminals are labeled and a wiring diagram is provided
inside the door, as shown in
. The numbered switch positions correspond
to the numbered modes in
. The N terminals should not be used with 3-
wire ProDySC models.
Bypass Connection
Advertising