Rockwell Automation 1608P ProDySC User Manual, 100/110 A - Manual (Page 19)

Rockwell Automation Publication 1608P-UM002A-EN-P - July 2013 19
Chapter
5
Display Screen
Overview
The ProDySC® touch screen display is a window to voltage sags and ProDySC
protection. The display provides system status, voltage sag notification and
history, runtime statistics and system history in a simple and intuitive touch-
based user interface.
When the system first starts, a welcome screen displaying the ProDySC product
logo appears. This screen disappears after 5 seconds, when the “Home” screen
appears.
Note: The touch screen is optimized for use with a plastic stylus or bare finger.
At installation time perform the following
steps to configure your system:
Step 1: Press the "CONFIG" button
at the bottom of the “HOME” screen
(See
Figure 10 ).
Figure 10 - Home Screen
Step 2: Begin calibration by pressing
"CALIBRATE TOUCH SENSOR"
(See
Figure 11 ).
Figure 11 - System Configuration