Rockwell Automation 1608P ProDySC User Manual, 100/110 A - Manual (Page 28)

28 Rockwell Automation Publication 1608P-UM002A-EN-P - July 2013
Chapter 5 Display Screen
System Configuration
Press the "CONFIG" button at the bottom of the “HOME” screen to enter the
“System Configuration” screen (See
Figure 25 ). The “SET SYSTEM CLOCK”
and “CALIBRATE TOUCH SENSOR” functions are described at the start of
this chapter.
Figure 25 - System Configuration
Model Information
Touch “VIEW MODEL INFORMATION” to go to the “Model Information”
screen. (See
Figure 26 ).
Figure 26 - Model Information
Table 9 - Model Information
Description Function
Model Details
Model Number: System Model number
Serial Number: System serial number
System Rating: System voltage and current ratings
Unit Details
Node: The location index for the details listed to the right
Firm: The firmware version for the location indexed.
Type: Unique code specifying firmware part number for the location indexed.
Serial: The serial number for the location indexed
Volts: The rated voltage for the locations
Amps: The rated current for the location indexed