Rockwell Automation 1395 Reel Tension Paster Adapter - Manual (Page 43)

Publication 1395-RTP-5.1 - September 1997
Troubleshooting 4-3
Figure 4.1
Digital Reference Adapter Board LED Location & Identification
The +24V DC power supply has its LED mounted close to the input
fuse for the input power. Mounted at the bottom of the board are the
15 LEDs for the digital I/O. The 10 input LEDs are mounted left to
right – #1 through #10, followed by the 5 output LEDs mounted left
to right – #1 through #5.