Safety precautions – Rockwell Automation 1395 Reel Tension Paster Adapter User Manual

Page 6

Advertising
background image

Publication 1395-RTP-5.1 - September 1997

P-2

Preface

Safety Precautions

The following general precautions apply to Bulletin 1395 Drives and
to RTP applications:

!

ATTENTION: Only those familiar with the RTP
system, the products used in the system, and the
associated machinery should plan or implement the
installation, startup, and future maintenance of the
system. Failure to comply can result in personal injury
and/or equipment damage.

ATTENTION: Verify that all sources of ACand DC
power are deenergized and locked out or tagged out in
accordance with the requirements of ANSI/NFPA 70E,
Part II.

ATTENTION: Servicing energized industrial control
equipment can be hazardous. Severe injury or death can
result from electrical shock, burn, or unintended
actuation of controlled equipment. Hazardous voltages
may exist in the cabinet even with the circuit breaker in
the off position. Recommended practice is to disconnect
and lock out control equipment from power sources, and
discharge stored energy in capacitors, if present. If it is
necessary to work in the vicinity of energized
equipment, the Safety Related Practices of NFPA 70 E,
“ELECTRICAL SAFETY FOR EMPLOYEE
WORKPLACES” must be followed.
DO NOT work alone on energized equipment!

ATTENTION: The system may contain stored energy
devices. To avoid the hazard of electrical shock, verify
that all voltage on capacitors has been discharged before
attempting to service, repair, or remove a Drive system
or its components. You should only attempt the
procedures in this manual if you are qualified to do so
and are familiar with solid-state control equipment and
the safety procedures in publication NFPA 70E.

ATTENTION: An incorrectly applied or installed
Drive can result in component damage and/or a reduction
in product life. Wiring or application errors — such as
undersizing the motor, incorrect or inadequate AC
supply, and excessive ambient temperatures — can result
in the malfunction of the Drive equipment.

Advertising