Display screen, Chapter, Overview – Rockwell Automation 1608P-200A480V... HC-DySC User Manual User Manual
Page 21
Rockwell Automation Publication 1608P-UM005A-EN-P - November 2014
21
Chapter
5
Display Screen
Overview
The HC-DySC® touch screen display is a window to voltage sags and HC-DySC
protection. The display provides system status, voltage sag notification and
history, runtime statistics and system history in a simple and intuitive touch-
based user interface.
When the system first starts, a welcome screen displaying the HC-DySC product
logo appears. This screen disappears after 5 seconds, when the “Home” screen
appears.
Note:
The touch screen is optimized for use with a plastic stylus or bare finger.
At installation time perform the following
steps to configure your system:
Step 1:
Press the “CONFIG” button
at the bottom of the “HOME” screen
(See
Figure 10
).
Figure 10 - Home Screen
Step 2:
Begin calibration by pressing
“CALIBRATE TOUCH SENSOR”
(See
Figure 11
).
Figure 11 - System Configuration