Fiber-optic safety statements – Rockwell Automation 1786-RPFRXL ControlNet Fiber Ring Modules Installation Instructions User Manual
Page 5
ControlNet Fiber-optic Ring Repeater Modules 5
Rockwell Automation Publication 1786-IN003D-EN-P - April 2011
Prevent Electrostatic Discharge
Fiber-optic Safety Statements
ATTENTION: This equipment is sensitive to electrostatic
discharge, which can cause internal damage and affect normal
operation. Follow these guidelines when you handle this
equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when
not in use.
ATTENTION: Laser light can damage your eyes. Laser light is
invisible. Looking at it directly does not cause pain. The iris of the
eye will not close involuntarily as when you view a bright light.
Consequently, serious damage to the retina of the eye is possible.
Never look into the end of a fiber when it may have a laser coupled to
it, or directly into fiber ports. Should accidental eye exposure to laser
light be suspected, get an eye examination immediately.
ATTENTION: Class 1 laser product. Laser radiation is present
when the system is open and interlocks bypassed. Only trained and
qualified personnel should be allowed to install, replace, or service
this equipment.