Rockwell Automation 1734-IM2_IM4 POINT I/O 220V AC Input Module User Manual
Page 12
Advertising
12 POINT I/O 220V ac Input Module
Publication
1734-IN008C-EN-E - January 2007
3. If an I/O module is installed, snap the RTB handle into place
on the module.
WARNING
When you connect or disconnect the removable terminal block (RTB)
with field-side power applied, an electrical arc can occur. This can
cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
Insert the module straight down into the
mounting base.
Hook the RTB end into
the mounting base end
and rotate until it locks
into place.
44011
Advertising