Wire the module – Rockwell Automation 1734-IM2_IM4 POINT I/O 220V AC Input Module User Manual
Page 14
Advertising
14 POINT I/O 220V ac Input Module
Publication
1734-IN008C-EN-E - January 2007
5. Repeat steps 1…4 for the module to the right.
6. Use a small-bladed screwdriver to rotate the orange
base-locking screw to a vertical position to release the locking
mechanism.
7. Lift straight up to remove.
Wire the Module
To wire the module, refer to the figures and tables.
WARNING
If you connect or disconnect wiring while the field-side power is on,
an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
Advertising