Install the module – Rockwell Automation 1734-IM2_IM4 POINT I/O 220V AC Input Module User Manual
Page 9
Advertising
POINT I/O 220V ac Input Module 9
Publication
1734-IN008C-EN-E - January 2007
Install the Module
The module can be installed before or after base installation. Make
sure that the mounting base is correctly keyed before installing the
module into the mounting base. In addition, make sure the mounting
base locking screw is positioned horizontally with reference to the
base.
Be sure the DIN-rail locking screw is
in the horizontal position.
Turn the keyswitch to align
the number with the notch.
Notch position 3 is shown.
1734-TB base is shown.
44229
Advertising