Barco R9010010 User Manual
Page 18
Advertising
3. Installation Guidelines
Necessary tools
Flatblade screwdriver of 5mm or Nut driver 8mm
Installing the lamp unit
1. Remove the lock nut on the 3 spacer screws (A). (image 3-9)
2. Line up the lamp unit guides with the guides on the projector frame (B) and push the unit into the frame until it fits. (image 3-10)
3. Secure the position of the lamp unit with the 3 spacer screws. (image 3-11)
Image 3-9
Lamp unit, removing the lock nuts
14
R5976563 BARCOR10 SLM 20/10/2004
Advertising