Barco R9010010 User Manual
Page 20
3. Installation Guidelines
Image 3-12
Mounting the side cover
Image 3-13
Closing the side cover
Image 3-14
Locking the side cover
3.6 Re-adjusting the lamp position in the lamp casing
W
ARNING
:
As the projector has to be opened, this procedure has to be performed by qualified service tech-
nician.
Why
With higher run times, the light output of the lamp will decrease, which results in a lower light output on the screen. This light output
decrease can be compensated by readjusting the position of the lamp.
A suggestion dialog box will be displayed when the projector is restarted after 100 hours and 250 hours. Once ENTER is pressed
when that box is open, this box will not be displayed again till the next alert point is reached.
16
R5976563 BARCOR10 SLM 20/10/2004