Connections, 1 power connection, 2 switching on – Barco R9010010 User Manual
Page 31: Overview, Ac power cord connection, Fuses, How to switch on, Starting image projection
4. Connections
4. CONNECTIONS
Overview
•
•
•
•
•
•
4.1 Power connection
AC Power cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector
at the left of the projector. The power input is 230 VAC.
Fuses
The projector is protected with an automatic circuit breaker of 15A which is built in into the power switch.
4.2 Switching on
How to switch on.
1. Press the power switch to switch on the projector.
- When ’0’ is visible, the projector is switched off.
- When ’1’ is visible, the projector is switched on
The projector starts in standby mode. The projector indication lamp is red.
Starting image projection.
1. Press Stand by key once on the local keypad or on the remote control.
The projector mode indication lamp will be green (image 4-1)
Or,
Press a digit button to select an input source.
-
+
-
+
-
+
-
+
-
+
0
9
7
8
6
5
4
3
2
1
ENTER
32a
PAUSE
-
+
PHASE
FREEZ
TEXT
EXIT
ADJ
STBY
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
HELP
?
COLOR
PHASE
SHARPN
TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2
1
4
3
5
6
8
0
9
7
CONTRAST
A
Image 4-1
Standby indication
R5976563 BARCOR10 SLM 20/10/2004
27