Barco R9010010 - Manual (Page 69)

7. Random Access Adjustment Mode
Changing the gamma value
1. Push the cursor key ↑ or ↓ to highlight Gamma. (menu 7-30)
2. Press ENTER to select.
3. Change the gamma value by pushing the cursor key ← or → until the desired value is reached.
Note: Default value of gamma : 2.2
4. Press EXIT to return to the Picture Tuning menu.
PICTURE TUNING
CTI[ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-30
7.3.5 Decoding
What can be done ?
The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard.
Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
How to change the decoding setting ?
1. Push the cursor key ↑ or ↓ to highlight Decoding. (menu 7-31)
2. Press ENTER to toggle between EBU or IRE.
3. Press EXIT to return.
PICTURE TUNING
CTI[ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-31
7.3.6 Dynamic Color Depth
Purpose
Increases color contrast for all video and data sources.
R5976563 BARCOR10 SLM 20/10/2004 65