Dual trunk e1 router – Black Box LRU4240 User Manual

Page 125

Advertising
background image

Dual Trunk E1 Router

Dual Trunk E1 Router User’s Guide

TECHNICAL: 0118 931 2233

113

Table D-2 Menu-0A - Interface configuration

$IA

Static Frame Relay Map
config

Configure manually DLCI to IP address mappings. See

“Configuring Frame

Relay DLCIs” on page 33

$IB

Display active Frame Relay
Map Table

View current DLCI to IP address mappings. If inverse ARP is enabled on an
interface, DLCI to IP address mappings is automatically learnt.
Manually configured mappings are also displayed on this menu.

$JA

NAP/NAPT configuration -
Global Map table

Configure global IP addresses and mapping to network interfaces. See

“Configuring NAT” on page 54

$JB

NAP/NAPT configuration -
Static table

Assign manually global IP addresses to local hosts. See

“Configuring NAT”

on page 54

$JC

NAP/NAPT configuration -
Local address table

Configure local networks requiring NAT.

“NAT Configuration menus” on

page 54

$JE

NAT Configuration

Enable or disable unit NAT configuration.
Enable/Disable NAT, overloading (NAPT) per network interface.

$JF

NAT Dynamic entries

Displays current global IP addresses allocated through NAT.

$K

DHCP configuration

Enable/Disable DHCP relay and configure DHCP relay server IP address

135

Parameter

Parameter—Options ; Definition

UNIT

In-band monitoring
Enables or disables in-band monitoring.

Traffic Type
Set WAN protocol to PPP or Frame Relay.

The selected WAN protocol applies to all WAN interfaces. In PPP mode all the TUI
menus will be configured for PPP operations. In Frame Relay mode all the TUI menus
will be configured for Frame Relay or Multilink Frame Relay operations.

Multilink Protocol

• Select Yes to enable multilink PPP (MLPPP) or multilink Frame Relay (MFR)

according to the selected traffic type set above. Both T1/E1 links will be bonded as a
single virtual connection and will be identified as bundle0.

• Select No to enable independent E1 links. The two E1 links will be identified as

NET1 and NET2.

COMM

IP Address
Set the COMM port IP Address in standard IP form (nnn.nnn.nnn.nnn).
Len
Set the IP mask

Table D-1 Router Menus (5 of 5)

Menu
Number Name

Description

Page

Advertising