Rockwell Automation AADvance Controller Troubleshooting and Maintenance Manual - Manual (Page 62)

 

5-2 Document: 553634
(ICSTT-RM406F_EN_P) Issue: 089:
Troubleshooting and Maintenance Manual (AADvance
Controller)
1) Select the Equipment tab to use the Project Tree View to locate the channel you
wish to investigate.
2) Identify the reference for the State variable. This will be of one of two forms:

%IBnnn.0.7 for an input module

%QBnnn.0.7 for an output module (illustrated)
Note: From Release 1.2, live data is available in the view shown above. For earlier
releases, use the Spy List as described below.
3) Select Debug Target and then open the Spy List.