Water installation – Brew Express BE-110 INSTALLATION User Manual

Page 11

Advertising
background image

Always turn off water supply at source. It is strongly advised you consult a qualified professional plumber when
attempting to install the BREW EXPRESS in-the-wall COFFEE SYSTEM.

It is important to make sure there are no conflicts or obstructions in the wall cavity such as plumbing or
electrical wires. If in doubt, contact a qualified professional. DO NOT ATTEMPT INSTALLATION.

IMPORTANT:
It is recommended that a water filter and shut off valve be
installed at source under sink or refrigerator area.

A. EXISTING HOME

Determine the desired location of the BREW EXPRESS. Avoid

outside walls in colder climates to prevent freezing of water line.

Location should have access to cold water supply (sink,

refrigerator ice maker). Alternately, water can be supplied

using a pump and water bottle (not supplied). Drill a hole (7/16” dia.)

at the lowest point in the cabinets and route water line through

hole behind cabinets and up wall cavity to the cut opening in

wall. Leave approximately 18” of excess water line at wall

opening for rough-in-box installation. Continue water line to

source.

Splicing/coupling is not recommended. A

continuous line will be best to ensure no leaks.

B. NEW HOME CONSTRUCTION

Determine the desired location of the BREW EXPRESS. Avoid

outside walls in colder climates to prevent freezing of water line.

Location should have access to cold water supply (sink,

refrigerator ice maker). Route water line through studs and up

wall cavity to area where wall opening will be cut prior to sheet

rock installation. Allow an additional length of 18” at area where

wall opening will be cut. Using template provided mark the area to

be cut AFTER sheet rock is installed.

IMPORTANT:
If installing unit PRIOR to cabinets, it is strongly advised to
consult with cabinet maker and building contractor for exact
height of counter top due to the various thicknesses of
counter tops (tile, laminate, granite, etc). For best results
cut hole and install unit AFTER cabinets are installed.

8

wATEr INSTALLATION

Shut off valve

Water

Filter

Advertising
This manual is related to the following products: