Brew Express BE-110 INSTALLATION - Manual (Page 6)

3
GET TING STArTED
IMPORTANT:
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
Getting Started
1. Carefully unpack BREW EXPRESS from gift box.
2. Remove carafe and brew basket from brewing unit. If brewer
includes carafe lock, press on lever to remove carafe.
3. Remove hardware kit from inside brew basket.
4. Remove mounting screws from behind carafe and
brew basket. The top mounting screw holds the carafe
lock bracket.
5. Separate brewer from Rough-In-Box by holding the
Rough-In-Box with one hand, and pulling the brewer
with the other hand (see figure below).
Hold unit by placing
one hand here
Pull alternately from
both sides