brite-View Air SyncHD BV-2322 User Manual - Manual (Page 12)

11
Press the CHANNEL button on the RCU to manually switch between wireless channels if the
user experiences video noise.
Press “CHANNEL” button once for current Channel status displayed on the OSD:
▃▆█ ▃▆█ ▃▆█ ▃▆█ HDMI1 [CH10] WIDE Off 1280x1024
Press again to change Channel
Press the “CHANNEL” button again within 5 seconds to change Channels manually.
▃▆█ ▃▆█ ▃▆█ ▃▆█ HDMI1 [CH 8] WIDE Off 1280x1024
Press again to change Channel
Press the WIDE button of RCU for longer distance transmission of audio/video contents. (1080i
content only)
(1) Press once for current WIDE mode status displayed on the OSD (Default is disable) :
▃▆█ ▃▆█ ▃▆█ ▃▆█ HDMI1 CH10 [WIDE Off] 1280x1024
Press again to switch WIDE mode
(2) Press WIDE button again within 5seconds to switch to WIDE mode status, OSD displayed
as such :
▃▆█ ▃▆█ ▃▆█ ▃▆█ HDMI1 CH10 [WIDE On] 1280x1024
Press again to switch WIDE mode
NOTE : Only the status of the BV-2322R (receiver) connected to the HDTV can be displayed on the
OSD. The status of the BV-2322T (transmitter) HDMI out can not be displayed.