brite-View Air SyncHD BV-2322 User Manual User Manual
Page 8
7
2.2 Overview
A.
BV-2322T: Full HD Transmitter
Front Panel Buttons and LEDs
Power Button with LED Indicator
Press to turn the transmitter on and off. The
indicator in the power button is lit solid blue
when the power is on, and turns red in standby
mode.
Source Selection Button
Press this button to change the frequency of IR
blaster among 38 KHz, 47 KHz and 58KHz.
Default frequency is 47KHz. See the OSD
description on TV screen for operation after
connecting the BV-2322R to the TV via HDMI
out.
Note1:
The BV-2322T transmitter can be connected to
one audio/video device running on HDMI cable
and transmit the A/V signals to the 2
nd
HDTV,
plus looping through the signals to the 1
st
HDTV
set connected to the BV-2322T via the HDMI
OUT port at the same time.
Main Unit Back Panel
IR Blaster Extender Jack
Plug the IR Blaster Extender Cable into the IR
OUT jack at rear panel of the transmitter. Attach
the IR blaster to the device connected to the
BV-2322T. You can point your AV equipment’s
existing remote control at the BV-2322R receiver
(usually close to your TV) to control connected
device.
HDMI OUT
To use the “loop-through” feature, you can place
your 1
st
HDTV set close to the AV equipment,
and connect the BV-2322T (transmitter) to that
HDTV set via HDMI out, and the AV equipment
via HDMI in. Then, you can enjoy the same
digital content on your 2
nd
HDTV set connected
to the BV-2322R (receiver), possibly in another
room.
HDMI IN
Connect
Transmitter
to
High-definition
audio/video devices that have an HDMI port
using a provided HDMI cable.
DC IN
For connecting the BV-2322T power adapter.
Note2:
With the loop-through connection, the same
video/TV show can be displayed on either the 1
st
HDTV also connected to the BV-2322T, or on a
2nd HDTV possibly in a different room, once the
transmitter is paired successfully with receiver
connected to the 2nd HDTV set.