brite-View Air SyncHD BV-2322 User Manual - Manual (Page 16)

15
Step 4: Boot up the BV-2322T and BV-2322R
(1)
Place the two AAA batteries into the remote control.
(2)
After the power cord is plugged into the electrical outlet, the BV-2322 will be turned on
automatically.
(3)
If it is on Standby mode and the loop-through connection is on, and the both displays are off
(Both POWER LED of transmitter and receiver are lit in red), press the POWER button on both
transmitter and receiver to turn on the BV-2322T and BV-2322R.