brite-View Air SyncHD BV-2322 User Manual - Manual (Page 18)

17
(6)
Press the SOURCE button, until you see the video being broadcasted from your A/V device.
(7)
If you have electronic devices such as a cordless phone or wireless access point/ router sharing
the 5GHz channel frequency, you may experience disturbed picture or diminished sound
quality when the Air SyncHD is close to those devices. Press the CHANNEL button on the
remote control to change the BV-2322 to different channels.
Note:
A. Changing the BV-2322 to a different wireless channel:
1. Enter the wireless RF
channel adjustment mode 2. Changes to the next
available RF wireless channel
3. Exit the wireless
RF channel
adjustment mode
Method
Press the CHANNEL button on
the Remote Control Unit (RCU)
for current channel status
display. Press the CHANNEL button on
the RCU again within 5
seconds to switch channel
randomly.
No button is pressed
for 5 seconds.
OSD Display
Status
▃▆█ ▃▆█ ▃▆█ ▃▆█ HDMI1 [CH 8] WIDE Off 1280x1024
Press again to change Channel
Exit.