Breville BGR400XL - Manual (Page 4)

Operating your Breville ikon Grill
7
Remove any promotional materials and packaging
materials before use. Check that the cooking plates
are clean and free of dust. If necessary, wipe over
with a damp cloth.
When using the Breville ikon Grill for the first time
you may notice a fine smoke haze. This is caused by
the heating of some of the components. There is no
need for concern.To use as a grill
1. Insert the plug into a 110/120 volt power outlet
and switch the power ON. The Red power ‘On’
light will illuminate.
2. Ensure the Removable drip tray is correctly
inserted and positioned correctly into the
appliance (see Fig 1).
3. Ensure the top and bottom grill plates are
securely locked into position (Fig 2).
4. Ensure the top plate is in the closed position for
more efficient pre-heating.
5. Turn the tilt control to the ‘Angle’ position, to
ensure better fat drainage.
6. Turn the variable temperature control to ‘Sear’
for fast heat up.
7. Allow the ikon Grill to preheat until the green
‘Ready’ light illuminates.
8. Place meat or foods to be cooked on the bottom
cooking plate. Refer to Grilling recipes or guide
for cooking times.
It is important that the ikon grill plates are
securely locked into position when using the grill.
Note
8. Using the handle to close top plate. The top plate
has a floating hinge system that is designed to
press down evenly on the food. The Grilling
Height Control on the right hand side of the top
plate is used to adjust for the thickness of the
food. The top plate must be fully lowered to
achieve the grill marks onto the food.
9. When the selected ingredients are grilled, use
the handle to open the top lid. Remove the
food using a plastic spatula.
Know your Breville ikon Grill
6
Stylish stainless steel exterior
Floating hinged top plate
Heavy duty metal arms
1800 watt of power
Non-stick scratch
resistant surface
Unique fat reducing
angled grill plates
Removable drip tray
Extendable non-skid feet
Cord storage
Adjustable Grilling Height Control
Variable temperature control
Power ‘On’ and ‘Ready’ lights
Plate release buttons for easy removal
Additional interchangeable
flat plate
Plate Tilt control function
Fig 1
Fig 2