ClearCube PCoIP System User's Guide User Manual

Page 116

Advertising
background image

Troubleshooting Firmware Updates

ClearCube Technology, Inc.

109

the correct host. Administrators can also use the auto-reconnect feature in this
environment.

Unmanaged environment with a shared network (static IP): The benefits of using

static IP addresses in a shared, unmanaged environment are similar to those described
above for reserved DHCP addresses. When using static IP addresses, a DHCP server is
not required in the environment.

Unmanaged environment with direct connections: Using SLP enables zero clients to

automatically discover host cards. In this environment, administrators can replace
(change) zero clients without reconfiguring peer settings.

Network and subnets

ClearCube recommends creating a subnet specifically for PCoIP traffic and connecting zero
clients and blades using PCoIP technology to that subnet. Keep regular network traffic and
PCoIP traffic on different subnets can significantly improve network bandwidth usage.

Network and hardware

Ensure that all necessary network devices are configured correctly. See

4.4

Mandatory

Network-Related Settings

on page

39

and the following subsections for more information.

Network

Create a numbering or other identification scheme that enables you to physically associate
zero clients with host cards (in this case, with the blade containing the host card) and the
chassis and racks that contain them.

Use the simplest connection mode and network topology possible for your environment (see

Chapter 2

Connection Modes and Network Topology

on page

12

for descriptions of each

mode). The following list details connection methodologies starting with the simplest and
ending with the most complex (these are discussed in detail later in this document):

Direct connection using static IP addresses and homerun cabling

Network connection using static IP addresses

Network connection using DHCP and reserved IP addresses

Network connection using DHCP

Mounting, airflow, and temperature

Ensure that vents on the top or sides of zero clients are unobstructed. Do not rest anything on
top of or on the side of zero clients, such as papers, optical drives, and so on. Doing so can

Advertising
This manual is related to the following products: