ClearCube PCoIP System User's Guide - Manual (Page 94)

6.7 Configuring Video Settings
ClearCube Technology, Inc. 87
mirroring) displays so all monitors display the same image, extending the desktop across all
monitors so you can move windows back and forth between all monitors, and turning off displays.

Display order
You can configure how the operating system orders the displays connected to a zero client. A
simple method is to make the virtual arrangement of displays the same as their physical
arrangement. Specifying this arrangement from the operating system’s display settings
ensures that mouse movements are contiguous from the edge of one display to the adjacent
edge of the next display. For example, suppose you have two displays side by side and drag a
window from the left display to the right display. When the window reaches the right edge of
the left display, it moves to the left edge of the right-most display.
Figure 39. Dragging a window from the left display to the right display
From the Control Panel’s display settings area (shown below), drag numbered icons
representing your displays to the location that you want. Specifying and identifying the
primary monitor is helpful in this scenario.
Figure 40. The Control Panel display settings area

Orientation
If your business needs require that you physically rotate your displays, you can specify the
appropriate landscape or portrait orientation in the Control Panel’s display settings area. Note
that you can specify a different orientation for each display.
1 2 1 2 1 2