ClearCube PCoIP System User's Guide - Manual (Page 35)

Chapter 3. Network Considerations
28 PCoIP System User’s Guide
3.6.4 Image Quality
The Image page enables you to adjust the image (graphics) quality of the PCoIP session.
Figure 14. Image configuration page
The table below shows each setting on the Image page.
Table 5. Image page settings
Field Description
Use Client Image Settings This field is only available from the host.
When enabled: Image settings on this page are not editable.
The settings that appear (grayed out) are those stored for the
host in flash memory.
When disabled: You can change image settings and
changes are applied to any current sessions.
Minimum Image Quality This setting enables compromise between image quality and
frame rate when network bandwidth is limited. Some use
cases may require lower quality images at a higher frame rate
while others need higher quality images at a lower frame rate.
In environments where the network bandwidth is constrained,