ClearCube PCoIP System User's Guide - Manual (Page 40)

33
Chapter 4.
Initial Setup
4.1
Caution Statements
Improper connection, mounting, or use of this product could result in component failure or
undesired interference. Read the following caution statements before setting up and operating
zero clients.

Do not connect to AC power until all other connections are made, including the power
adapter. Connecting or disconnecting components or equipment on the back panel when the
zero client is receiving AC power can cause power surges and damage the device.

Do not force a connector into a socket. If any undue resistance is encountered, ensure that the
connector is correctly oriented to the receptacle.

Do not attach a zero client to a telephone jack or other powered network connection. This will
permanently damage zero clients. This damage is not covered under the ClearCube
Technology, Inc. limited warranty.

Allow sufficient space around zero clients for ventilation. Do not place the device in any
enclosure that restricts airflow around the device. Do not place any objects on the device.

To ensure regulatory compliance, use only the power supply included in the shipping carton
with the zero client, or a ClearCube-approved equivalent.

Surge protectors for electrical devices are recommended in areas of frequent lightning.
However, when lightning is occurring, your equipment should be properly shut down and
unplugged from AC power until the storm has passed.

Ensure that you do not interrupt power while zero clients receive firmware updates.
The following sections describe how to set up and mount a zero client.