Lexicon MPX 1 - Manual (Page 50)

5-1
System Controls
5
System Controls
The System menus shown below provide access to all of the controls which
affect overall operation of the MPX 1, such as Bypass state, MIDI transmit and
receive channels, as well as some unique options that make the MPX 1 adapt
to your personal requirements. These controls are each explained in detail in this
chapter, in the order in which they are displayed in System mode.
Note that, in System mode, as elsewhere, the Value button acts as a toggle to
allow you to assign "select" and "adjust" functions to either the knob or the < and
> buttons, whichever is most convenient. As the default state of the Value button
is On (lit), any step by step instructions given in this section will assume this state.
Press System to enter the System menu, and use the knob to select the
particular menu you want. With the menu of your choice displayed (Audio,
Modes, etc.), use the < and > buttons to enter the submenu and select
parameters, and the knob to adjust parameter values. When you're finished
making adjustments within any menu, press System to return to the main
System menu, or press the < and > buttons to select another control from the
same menu.
When Value is lit, the < and > but-
tons select parameters, and the
knob adjusts the value of the se-
lected parameter.
The System Menus