Lexicon MPX 1 - Manual (Page 62)

5-13
System Controls
Clear Programs This control allows you to clear a single User program, or any number of
consecutively numbered User programs.
From the Clear Programs screen, press > to display the following screen.
Two fields are available for selecting any num-
ber of User programs between 201 and 250.
Clear Programs
201 to 250
The Store button LED will flash, indicating that the MPX 1 is armed to perform
the clear procedure. Press Yes to execute the clear operation. Note that this will
override the Memory Protect function if it is on.
A displayed message indicates that the clear operation is complete. Press
System to return to the main System menu.
Note that if you clear the active program, you can still use it and make
modifications to it (including restoring it) until you load another program, at which
time the clear action will take effect.
Are you sure?
Yes or No
Press Yes to clear the se-
lected programs. Press No to
cancel the operation.
The Store button will flash. Pressing it
will display the following message ...