Metrohm 850 Professional IC AnCat Nonsuppressed - Manual (Page 17)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Overview of the instrument
850 Professional IC–AnCat – non-suppressed
￭￭￭￭￭￭￭￭ 7
3 High pressure pump
One high pressure pump each for the two
channels.
See Chapter 3.10, Page 35 4 Purge valve
One purge valve each for the two channels.
See Chapter 3.10.1, page 35
5 Injection valve
One injection valve each for the two chan-
nels.
See Chapter 3.14, Page 44 6 Pulsation damper
One pulsation damper each for the two
channels.
See Chapter 3.12, Page 41
7 Sample degasser
One sample degasser each for the two
channels. Utilization optional.
See Chapter 3.13, Page 43 8 Column thermostat
See Chapter 3.15, Page 47.
9 Column holder
For two separation columns in the column
thermostat and one additional separation
column outside the column thermostat.
See Chapter 3.19, Page 55
It is conventional to refer to the channel with the upper high pressure
pump and the left-hand conductivity detector as the anion channel, and
the channel with the lower high pressure pump and the right-hand con-
ductivity detector as the cation channel.