Figure 33, Removing the piston seal, Figure 34 – Metrohm 850 Professional IC AnCat Nonsuppressed User Manual
Page 78: Insert the piston seal into the tool
5.5 High pressure pump
■■■■■■■■■■■■■■■■■■■■■■
68
■■■■■■■■
850 Professional IC–AnCat – non-suppressed
1
2
Figure 33
Removing the piston seal
1
Piston seal
2
Tool for piston seal
Pin of the tool.
2 Inserting the new piston seal into the tool
Insert the new piston seal tightly by hand into the recess of the
sleeve of the tool for the piston seal (32-2). The sealing springs must
be visible from the outside.
1
2
Figure 34
Insert the piston seal into the tool
1
Tool for piston seal 6.2617.010
Sleeve for inserting the new piston seal.
2
Piston seal
Order number: 6.2741.020
3 Inserting the new piston seal into the pump head
Guide the sleeve of the tool for the piston seal (32-2) with inserted
piston seal into the pump head and press the seal with the wide end
of the tool for the piston seal (32-1) into the pump head recess.