2 deaerating the high pressure pump, Deaerating the high pressure pump – Metrohm 850 Professional IC AnCat Nonsuppressed User Manual
Page 48
Advertising
3.10 High pressure pump
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
38
￭￭￭￭￭￭￭￭
850 Professional IC–AnCat – non-suppressed
3.10.2
Deaerating the high pressure pump
The high pressure pump will only operate perfectly if the pump head con-
tains no more air bubbles. Therefore it must be deaerated during initial
start-up and after every change of eluent.
Caution
The high pressure pump must not be deaerated before the initial start-
up .
Deaerate the high pressure pump as follows (see Figure 20, page 39):
Advertising