Metrohm 850 Professional IC MSM-HC MCS Prep 3 - Manual (Page 135)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Technical specifications
850 Professional IC Anion – MSM-HC – MCS – Prep 3
￭￭￭￭￭￭￭￭ 125
7.13 High Capacity Metrohm Suppressor Module
(MSM-HC)
Resistance to sol-
vents No restriction
Switching dura-
tion typ.100 ms
Operating pres-
sure 2.5 MPa (25 bar), valve function prevents damage at overpressure
7.14 Metrohm CO
2
suppressor (MCS)
Material fluoropolymer
Resistance to sol-
vents No restriction (apart from PFC)
Vacuum
Working range Microprocessor-controlled / stabilized
Build-up time
after start < 30 s
Capillary volume 400 µL
Recommended
flow range 0.1…1.0 mL
7.15 Conductivity measuring system
Type ￭ Microprocessor-controlled Digital Signal Processing (DSP technol-
ogy)
￭ Intelligent detector with 6 reference chromatograms
Measuring range 0…15000 µS/cm single range
Noise < 0.1 nS at 1 µS/cm
Deviations from
the linearity < 1 % for conductivity values greater than 1…16 µS/cm (typical for
analyses with sequential suppression)
Drift < 0.2 nS/cm per hour
Measuring rate 10 measurements per second for optimum results without filtering
Resolution 0.0047 nS/cm
Baseline Noise < 0.2 nS/cm typical for sequential suppression