Metrohm 850 Professional IC MSM-HC MCS Prep 3 User Manual
Page 28
3.3 Installation diagram
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18
￭￭￭￭￭￭￭￭
850 Professional IC Anion – MSM-HC – MCS – Prep 3
3
PEEK pressure screw, short 6.2744.070
4
MSM-HC eluent inlet capillary
Labeled with Eluent. Connected to the col-
umn output.
5
MSM-HC eluent outlet capillary
Labeled with Detector. Connected to the
input of the MCS.
6
PEEK pressure screw, long 6.2744.090
7
Conductivity detector
8
Detector inlet capillary
Connected to the output of the MCS.
9
Detector outlet capillary
10 MSM-HC regeneration solution aspirat-
ing capillary 6.1803.020
11 Tubing olive 6.2744.034
For connecting capillaries to the aspiration
side of the peristaltic pump.
12 Pump tubing 6.1826.320
With orange/yellow stoppers. For the regen-
eration solution.
13 Pump tubing connection 6.2744.180
With safety device and filter. For connecting
capillaries to the outlet side of the peristaltic
pump.
14 MSM-HC regeneration solution inlet
capillary
Labeled with H2SO4.
15 MSM-HC regeneration solution outlet
capillary
Labeled with Waste.
16 MSM-HC rinsing solution aspirating
capillary 6.1803.020
17 Pump tubing 6.1826.320
With orange/yellow stoppers. For the rinsing
solution.
18 MSM-HC rinsing solution inlet capillary
Labeled with H2O.
19 MSM-HC rinsing solution outlet capil-
lary
Labeled with Waste.
20 MCS adsorption cartridges
21 Air aspirating capillary
For aspirating CO2-low air from the car-
tridges of the MCS.
22 Separation column
23 SPM regeneration solution aspirating
capillary 6.1803.020
24 Pump tubing 6.1826.340
With black/black stoppers. For the regenera-
tion solution.
25 SPM regeneration solution inlet capil-
lary
Labeled with H2SO4.
26 SPM regeneration solution outlet capil-
lary
Labeled with Waste.
27 SPM rinsing solution aspirating capil-
lary 6.1803.020
28 Pump tubing 6.1826.340
With black/black stoppers. For the rinsing
solution.
29 SPM rinsing solution inlet capillary
Labeled with H2O.
30 SPM rinsing solution outlet capillary
Labeled with Waste.