Metrohm 850 Professional IC Cation - Prep 2 - Manual (Page 106)

6.13 Mains connection
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
96 ￭￭￭￭￭￭￭￭
850 Professional IC – Cation – Prep 2
Electrodes Ring-shaped electrodes made from stainless steel
Materials in
contact with
eluent Chemically inert PCTFE
Maximum oper-
ating pressure 5.0 MPa (50 bar)
Cell tempera-
ture 20…50 °C in increments of 5 °C
Temperature
stability < 0.001 °C
Temperature
compensation 0…5 %/K adjustable, default 2.3 %/K
Heating up time < 30 minutes (40 °C)
6.13 Mains connection
Required voltage 100…240 V ± 10 % (auto-sensing)
Required fre-
quency 50…60 Hz ± 3 (auto-sensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ internal fuse 3.15 A
6.14 Interfaces
USB
Input 1 USB upstream, type B (for connection to the PC)
Output 2 USB downstream, type A
MSB 2 MSB Mini Din 8-pin (female) (for Dosino, stirrer, remote lines, ...)
Caution
When connecting an instrument to the MSB connector you must
switch off the 850 Professional IC .
Detector 2 DSUB-15-pin high density (female)
Column recogni-
tion 3 (including 2 in the column thermostat (see Chapter 2.16, page 51))
Leak sensor 1 jack plug