Figure 37, Removing the piston seal, Figure 38 – Metrohm 850 Professional IC Cation - Prep 2 User Manual
Page 82: Insert the piston seal into the tool
4.5 High pressure pump
■■■■■■■■■■■■■■■■■■■■■■
72
■■■■■■■■
850 Professional IC – Cation – Prep 2
1
2
Figure 37
Removing the piston seal
1
Piston seal
2
Tool for piston seal
Pin of the tool.
2 Inserting the new piston seal into the tool
Insert the new piston seal tightly by hand into the recess of the
sleeve of the tool for the piston seal (36-2). The sealing springs must
be visible from the outside.
1
2
Figure 38
Insert the piston seal into the tool
1
Tool for piston seal 6.2617.010
Sleeve for inserting the new piston seal.
2
Piston seal
Order number: 6.2741.020
3 Inserting the new piston seal into the pump head
Guide the sleeve of the tool for the piston seal (36-2) with inserted
piston seal into the pump head and press the seal with the wide end
of the tool for the piston seal (36-1) into the pump head recess.