Metrohm Thin-Layer cell - Manual (Page 16)

3.4 Connecting the electrode connection cables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
IC Equipment Thin-Layer cell
3.4 Connecting the electrode connection cables
Caution
The electrode cables may not be plugged or unplugged unless the
measuring cell is switched off in the software.
Note
The sockets and the plugs of the cables must be clean and dry.
Connecting the electrode connection cables to the detector
Prerequisites:
￭ The measuring cell is switched off.
1 Plug in the straight plug of the working electrode connection cable
(red sleeve) into the WE socket of the detector.
2 Plug in the straight plug of the reference electrode connection cable
(black sleeve) into the RE socket of the detector.
3 Plug in the straight plug of the auxiliary electrode connection cable
(blue sleeve) into the AE socket of the detector.
Connecting the electrode connection cables to the measur-
ing cell
Prerequisites:
￭ The working electrode and the reference electrode are inserted into
the measuring cell.
1 Plug in the angled plug of the working electrode connection cable
(labeled with WE) into the working electrode socket.
2 Plug in the angled plug of the reference electrode connection cable
(labeled with RE) into the reference electrode socket.