Metrohm Thin-Layer cell - Manual (Page 26)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
20 ￭￭￭￭￭￭￭￭
IC Equipment Thin-Layer cell
6 Technical specifications
Structure Flow cell with working, reference and auxiliary electrode.
Material Cell body made of PEEK.
Cell volume Is dependent on the thickness of the spacer:
50 µm Spacer < 0.35 µL
25 µm Spacer < 0.18 µL
Maximum operat-
ing pressure 0.8 MPa (200 psi)
Cell recognition Intelligent cell with automatic identification and monitoring.
Auxiliary electrode
Type installed
Material Stainless steel
Reference elec-
trode
Type replaceable
Material ￭ Palladium solid phase electrode
￭ Ag/AgCl gel electrode